EDH5102 1080p Mini Dome Camera
4
Power Adapter Pigtail
Power Cable
BNC Cable
or
Power Adapter
7.
Connect the camera to a DVR or a portable monitor using the Test-Out cable for viewing
the camera view while adjusting camera angles. You can also use the OSD Menu Joystick
to configure camera settings.
a. Adjust camera angles by tilting or rotating the camera.
360
o
90
o
b. To configure camera settings using the OSD Menu Joystick, connect one end of the
Test-Out cable to the Test-Out connector on the camera module and the other end
to the portable monitor.
8.
Screw the camera cover cap back to the camera.
Push the Joystick up / down to select
among menu items.
Push the Joystick left / right to adjust
the level of the selected item.
Press the Joystick to enter the submenu
or exit the OSD Setup Menu.
