Safety Warning
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TVs, radio transmitters, magnets,
electric motors, transformers, and audio speakers as the magnetic
fields generated from these devices will distort the video image.
2.
Do not install the camera in a high temperature environment.
Install camera away from stoves or other heat generating devices
as the high temperature could cause deformation, discoloration or
other damage to the camera. Install the camera where the
temperature range will stay between -40 ~ 122 degree Fahrenheit.
3.
Never face the camera towards the sun.
Never aim the camera at the sun or other extremely bright objects
whether it is in use or not.
4.
Cleaning
Do not touch the surface of CCD sensor by hand directly. Use a
soft cloth to remove the dirt from the camera body. Use lens tissue
or a cotton tipped applicator and ethanol to clean the CCD sensor
and the camera lens. When the camera is not in use, put the cover
cap on the lens mount.
5.
Heater
Heater elements can be very hot! Heaters are located inside the
camera housing and will activate automatically while the
environment temperature is below 50 degrees Fahrenheit. Do not
touch the heater element while it’s active.
1
