Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
33
Gateway:
This address allows the IP Camera to access the Internet. The format of the Gateway address is the
same as the IP Address. For example, “192.168.001.001”.
DNS:
DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually, it’s enough to just enter the
DNS1 server address.
IPV6-IP Address:
The IPV6 address of the IP Camera.
IPV6-Gateway:
This address allows the IP Camera to access the Internet.
UPnP:
If you want to remotely login the IP Camera using Web Client, you need to enable the UPnP function and
also enable the Port Forwarding function on your router.
Note:
1.
For the UPnP function to work, an UPnP-enabled router is required.
2.
If your router does not support UPnP, ensure the
Port Forwarding
function is manually enabled
on your router.
3.
To enable UPnP, the Client port and HTTP port should be within 1024~65535.
P2P Switch:
Check the box to enable the P2P function. If
P2P
function is enabled, a QR code will be displayed
on the System Info page (System > Info). You can scan the QR code with
EverFocus VANGUARD
App installed on
your mobile device to add and remote access the IP Camera. Please refer to
5.7.9.1 Performing the P2P
Function
.
Click
Refresh
to refresh the page; click
Apply
to save the settings.
