Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
63
Click
Refresh
to refresh the page; click
Apply
to save the settings.
To configure the Pedestrian Detection function:
1.
Select
1
from the
Rule Number
drop-down list to configure the first area.
2.
Enable the
Rule Switch
and then define a
Rule Type
.
3.
To draw an area:
a.
Use your mouse to click 4 points to draw a rectangle shape. The shape should be convex. Concave
shape is not allowed.
b.
If you want to move the area to other position or re-size the area, select the area by checking the red
box on the upper-left corner of the area, the borders of the area will change to red color. Drag and
drop the area to a desired position. Drag the red dots at the edge of the area can re-size the area.
1: Foreign & Missing
c.
Click the
Apply
button to save the settings.
d.
You can click the
Clean All
button to remove the area.
Note:
The configured areas should not be too narrow or small in order to enhance the
detection rate.
