EHN3261/3361
5
2.
Unscrew the four screws and remove the Base Plate from the Camera Case.
Camera Case
Base Plate
3.
Unscrew the two screws and take out the camera module.
4.
Screw the Base Plate to the Wiring Box using the supplied four screws.
Base Plate
Wiring Box
If you want to
wire the cables through the
bottom of the Camera Case
, follow the steps below:
a.
Remove the Circle Plate on the bottom of the Camera Case. You can simply loosen the Circle
Plate using a coin.
Circle Plate
Camera Case
