4
4.
Screw the camera module to the
Mounting Plate
:
a.
Before mounting the camera module onto the
Mounting Plate
, thread the cables
through the wall or along the wall.
Through the wall / ceiling: run the cables through the hole on the wall / ceiling.
Along the wall: break the side cut plate on the
Mounting Plate
and then run the cable
from the side cut.
b.
Use the supplied 2
Small Screws
to lock the camera module to the
Mounting Plate
.
Camera Module
Mounting Plate
5.
Connect the camera to power. You can either connect the camera to a 12VDC power
source or to a PoE switch using the PoE cable.
6.
Connect the camera to the network using the supplied
Cable Gland Kit
.
a.
Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through
the supplied
Waterproof Ring
,
Cable Gland
,
Stopper
and
Screw Cap
accordingly.
Waterproof Ring
Cable Gland
Stopper Screw Cap
