EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
97
6.6.2
Wireless
You can set up the Wi-Fi network on this page.
Wireless Mode:
Three options are selectable:
Disable
,
Static IP
and
DHCP
.
Disable: Select to disable this function.
Static IP: User can set a fixed IP for network connection.
DHCP: DHCP server in LAN will automatically assign an IP configuration for the network
connection.
IP address:
Displays the mobile DVR’s current IPv4 IP Address. A static IP address must be set
manually. If DHCP is selected, this value will be assigned automatically.
Subnet Mask:
Displays the subnet mask for your network so the mobile DVR will be
recognized within the network. If DHCP is selected, this value will be assigned automatically.
Gateway:
Displays the gateway on your network for the mobile DVR to use when
communicating with any devices not on the local network. If DHCP is selected, this value will
be assigned automatically.
DNS Server 1:
Displays the primary DNS server for your network. If DHCP is selected and an
internet connection is available, this value should be assigned automatically. This field must
have a valid DNS address in order to use the DDNS feature (see
6.6.5 DDNS
).
DNS Server 2:
This field shows the secondary DNS server for your network.
Network Mode:
Select a wireless networking standard.
SSID:
Enter the name (SSID) of the wireless network.
Shared Key:
Enter the password of the wireless network.
Change Channel:
Select a wireless channel for the mobile DVR. It’s recommended to select
Auto
when there is more than one mobile DVR set up in the same wireless network
environment.
Security Mode:
Select a wireless encryption protocol: WEP, WPA and WPA2.
WPA Algorithms:
Select a WPA algorithm from the drop-down list.
Save:
Click to save the settings.
