24
Issue: 1.0
Sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the
picture.
Digital Image Stabilizer (DIS) function internally detects shaking of the image due to camera shaking and performs
digital compensation processing inside the DSP to suppress this shaking and stabilize the image output.
Compensation uses the electronic zoom function, so the digital zoom function cannot be set by the user while using
the DIS function.
- Enter into {Main Manu}
- Select {Camera Setup} and move to {Advanced Setup} using joystick [
▶
].
- Set sharpness level and brightness and DIS on/off
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
When both high-brightness subjects and low-brightness subjects have been shot at the same time, overexposure in
the high-brightness subjects or loss of dark detail in the low-brightness subjects may occur. The WDR (Wide Dynamic
Range) function creates images free from over-exposure or loss of dark detail by combining two images after tripping
the shutter for a long exposure time and for a short exposure time in one field.(One mode can be selected from
BLC/WDR/HSBLC/DNR)
- Enter into {Main Manu}
- Select {Camera Setup} and move to {Advanced} using joystick [
▶
].
- Set WDR for On/Off and a level in ‘On’ mode.
- Set other mode for On/Off and a level in ‘On’ mode in the same way.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
3.6 Dome Motion Menu
