EPN5230 / EPN5210
7
2.
Unscrew the four screws to remove the camera top module.
3.
On the rear side of the camera top module, insert the micro SD card to the card slot.
4.
This step is optional. If you want to replace a new desiccant bag, place the spare (or
self-prepared)
desiccant bag
in the same location as image below.
Note:
There is a desiccant bag placed inside the camera bottom module. The desiccant bag
loses its effectiveness after you open the camera. To keep the camera’s interior dry, it is
highly recommended to replace the desiccant bag every time when you open the camera.
5.
Screw back the camera top module.
