EPN5230 / EPN5210
22
5.4.1
Image Setting
On the Live View Window, click
Image Setting
to expand the image setting field. You can adjust image
parameters including brightness, hue, contrast, saturation and sharpness in this field. To restore the
parameters to default value, click the
Default
button. To collapse the Image Setting field, click
Image
Setting
again.
Brightness
Hue
Contrast
Saturation
Sharpness
Click to return the above value to factory default
Click to expand the Advanced Setting field
To further configure the image parameters, click
Advanced Setting
to expand the Advanced Setting field.
Click
Advance Setting
again can collapse the setting field.
Flip Image:
Click the
buttons to flip the image horizontally or
vertically.
BLC:
Check/uncheck the box to enable/disable the Backlight Compensation
function.
Low Lux:
Check/uncheck the box to enable/disable the low lux function.
WDR:
Check/uncheck the box to enable/disable the Wide Dynamic Range
function.
3D DNR:
Check/uncheck the box to enable/disable the 3D Digital Noise
Reduction function.
Day Night Mode:
Click
to switch the camera to day mode. Click
to
switch the camera to night mode. Click
for the camera to switch
between day and night modes automatically. If
Auto
is selected, you can
configure the sensitivity ranging from 0-255 in the To Mono and To Color
field. So the camera will automatically switch between day mode and night
mode based on the setup sensitivity.
Under
Night
or
Auto
Day Night mode, the camera will automatically switch
the IR LEDs from the near-distance lights to the far-distance lights based on
the zoom ratio. Please refer to
2. Physical Description
for more details.
