11/ 24
the option “back” to return to the pervious menu. This operation is valid only under
relevant commands.
G Exit menu: Shake joystick up and down, point the cursor to the option “Exit”, then
press button OPEN to exit OSD menu.
H Return to the previous menu: Shake the joystick up and down, point the cursor to the
option “Back”, ,then press button OPEN to return to the previous menu.
4.1 Main Menu
After the PTZ dome is powered on, call preset No.95, and enter the main menu.
There following information will be displayed on the screen, as in Figure 4.1.
Figure 4.1 Main Menu
Detailed explanation of main menu options
<SYSTEM INFORMATION>: Shows system information.
<ADDRESS SETTING>: Select and setup Soft/Hard address
<PTZ SETTING>: Setting up PTZ functions
< PATTERNS > : Trajectory scanning menu
< CAMERA> : Lens setting menu
< CRUISE SETTING>: Set presets scanning
< DISPLAY SETTING> : Set screen display options
< RESTORE FACTORY DEFAULT > : Restore factory setting
< REBOOT SYSTEM > : Reboot system
< EXIT> : Exit OSD menu
MAIN MENU
SYSTEM INFORMATION
ADDRESS SETTING
PTZ SETTING
TRAJECTORY SCANNING
CAMERA
CRUISE SETTING
DISPLAY SETUP
RESTORE FACTORY DEFAULT
REBOOT SYSTEM
EXIT
Summary of Contents for EPTZ850
Page 24: ...24 24...
