EPTZ9200/9300 Series
9
Protocol
The first, second and the third switches on the left are used to set the communication protocol. Please
refer to the sticker on the camera main body for setting up the protocol. The supported protocols are listed
on the sticker. The default protocol is EVF.
DIP Switch
Sticker on the Camera Main Body
Note:
If you switch the three protocol switches to
ON
, the camera will enter a self-test mode.
Baud Rate
The fourth and fifth switches on the left are used to set the baud rate (transmission speed). Please refer to
the sticker on the camera main body for setting up the baud rate. The default baud rate is 9600.
DIP Switch
Sticker on the Camera Main Body
Video Output Format
The sixth and seventh switches on the left are used to set the video output format. Please refer to the
sticker on the camera main body for setting up the video output format. The default video output format is
by OSD (OFF/OFF).
DIP Switch
Sticker on the Camera Main Body
