EPTZ9200/9300 Series
15
7.
Put on the supplied gloves before pushing upward the main body into the top housing. Draw out the
provided rope from the housing and hook it on the rope attachment hook of the main body.
8.
Make sure the red triangle
on the inside of the top housing lines up with the red triangle on the
outside of the main body. Push the main body upward into the top housing until the orange catches on
both sides click into position.
Top Housing
Main Body
Note:
1.
To release the main body, press the two orange release buttons on both sides. Make sure you are
holding the main body firmly, otherwise it will fall down.
2.
To protect the glass dome from getting dirty and scraped up, please put on the supplied gloves
before installing.
9.
Screw the housing cover to the top housing slowly by twisting it clockwise.
