EQH5202 Box Camera
15
Mirror:
Turn it on to reverse, rotate or flip the image.
D-Zoom:
Turn it on to set up the PIP view, zoom level, and the pan / tilt directions.
Note:
The D-Zoom setting is not functional on the SD test-out mode. If you connect an SD
monitor to the test-out port on the rear panel of the camera and then turn on the D-Zoom
setting in the OSD menu, the OSD menu will be turned off on the SD monitor. To turn on the
OSD menu on the SD monitor, click the
Reset
button on the rear panel of the camera.
NEG. Image:
Turn it on to see a negative-exposure image.
Motion
Enter the submenu to set up the motion detection zones:
Select:
Press to select a detection zone for setting up. 3 detection zones are available.
Display:
Turn it on to activate the selected detection zone. Enter the submenu to set up the
position or size of the selected detection zone.
Sensitivity:
Press to set up the sensitivity for the motion detection function.
Motion View:
Turn it on to enable this function.
Default:
Press to return to the default setting.
Privacy
Enter the submenu to set up the privacy masks, up to 8 zones can be created:
Select:
Press to select a privacy mask zone.
Display:
Turn it on to activate the selected privacy mask zone. Enter the submenu to set up the
position or size of the privacy mask zone.
Color:
Press to select a color for the selected privacy mask zone.
Default:
Press to return to the default settings.
Language
Select a language for the OSD text. Options include English, Traditional Chinese, Simplified
Chinese and Japanese.
Defect
Enter the submenu to set up the Defective Pixel Correction (DPC).
Live DPC:
Turn it on to set up the level in the next field. Switch to AUTO can automatically
correct pixel defects.
