EFN3320 Fisheye Camera
31
To set up the sequence:
The camera can display the selected preset points in a sequence order. Each position is applied with a dwell
time of 5 seconds. Click the
Sequence
button to start the function. The button will turn grey when the
function is enabled. Click the button again to disable the function. Note that to enable the Sequence
function, you have to create the preset points first.
1.
Check the boxes to select the positions for setting up the sequence.
2.
Click the
Sequence
button to start the function and the button will turn grey. Click the button again to
stop the function.
To start / stop the Auto Pan function:
You can force the camera to pan automatically by clicking the
Auto Pan
button. The button will turn grey
when the function is enabled. Click the button again to disable the function. For ceiling mount and desk
mount cameras, click the
Auto Pan
button will force the camera to pan 360° endlessly. For wall mount
cameras, click the Auto Pan button will force the camera to pan between a left and right positions.
