C H A P T E R 2 I N S T A L L A T I O N
12
Installation
This chapter will describe, in general terms, how to install the EZ430 camera.
STEPS:
1. Wire and mount the camera, See 2.1
2. Adjust the camera position, See 2.2
3. Adjusting image, See 2.3
Warning
•
To prevent electrical shock, turn off the electrical power before making
electrical connections.
•
Do not expose the appliance to water or moisture, nor try to operate it in wet
areas.
•
Do not connect high voltage power to the camera. It may damage the camera.
•
Do not short circuit the power leads and expose the wire when connecting the
power supply to the camera
2.1 Wiring and Mounting
1.
Pull the cables to be connected to power and video cables from wall.
Chapter
2
