4
4.
Screw the Camera Base to the surface using the supplied 3
Screws
.
5.
Place the camera body back to the Camera Base and twist back the
Outer Housing. Do not twist the Outer Housing too tight as you will
have to adjust camera angles while viewing camera live view.
6.
Connect the camera to the network using the supplied
Cable Gland Kit
.
a.
Insert a RJ-45 network cable (without the RJ-45 connector on the one
end) through the supplied
Waterproof Ring
,
Cable Gland
,
Stopper
and
Screw Cap
accordingly.
Waterproof Ring
Cable Gland
Stopper
Screw Cap
b.
Connect the RJ-45 cable to the
LAN/PoE Cable
of the camera.
RJ-45 Cable
LAN/PoE Cable
c.
Tightly screw the
Cable Gland
and
Screw Cap
to the Rugged RJ-45
Connector Cable.
Screw Cap
Cable Gland
d.
Crimp the RJ-45 connector onto the RJ-45 network cable. Note that
the wires should be placed into the RJ-45 connector based on the
following order (from left to right).
