PARAGON960 x4 32CH
78
Figure 6-12
Record Overwrite:
Check the box to overwrite the hard disk when it is full. Note that unless
this box is checked, or the DVR will stop recording when the hard disk is full. The use of record
overwrite is strongly recommended. If you do not use this feature, please be sure to enable
the Event setting for Disk Full for notification (see
6.4.4 Other
).
Schedule Record:
Check the box to record by the schedule. Please see
6.8 Schedule Setting
for
more details.
Time Stamp:
Select Bottom or Top to record the system date and time on the bottom / top of
the image. Select off will not record the system date and time in the recordings.
Record Status Relay Output:
Select a number to monitor the recording status of the selected
alarm relay. The recording status of the selected alarm relay will be transmitted to the alarm
output device.
Auto Erase Video:
The hard disk will automatically erase video after it has been on the hard
drive for the selected number of days. To use the maximum hard drive space, choose “OFF”.
(See Record Overwrite and notes above.) This feature is useful if local rules and regulations
require recorded video to be discarded after a specific number of days, or to limit the
retention of older recorded video to clear space in anticipation of event recording.
Estimation Result:
Shows the remaining storage space.
6.4
Event
You can configure the Alarm, Video Loss, Motion and Other settings in this menu.
