EZN7221/7260/7360
83
b.
Enter the port numbers and check the
Enable UPnP Port Forwarding
box to enable the port
forwarding function. Click the
Apply
button.
The default ports of all EverFocus’ IP cameras are as below. You can change the port numbers if
necessary. Be sure the port numbers setup on the router match the ones setup here.
HTTP: 80
HTTPS: 443
RTSP: 554
2.
Set up the port forwarding settings on the router. Here we use D-Link’s router for example.
Please be noted that each router may look different in some ways, however, the concept of the
port forwarding setting is the same. For more details, please consult the manual of your router.
Enter the IP address of the IP camera
Enter the HTTP/HTTPS/RTSP port
numbers of the IP camera
3.
Open a browser and type in the IP address of the router, now you are able to access the IP camera
from the Internet.
