6
NOMINAL HEATING CAPACITY
The nominal heating capacity of the stove amounts to 5.0 kW. It will be reached at a
chimney draught of 10 Pa – to 12Pa.
ROOM- HEATING CAPACITY
The room-heating capacity is corresponding to DIN 18 893 for room, whose thermal
insulation does not correspond to the requests of the warmth protection ordinance for a
nominal heating capacity of 5.0 kW.
In favourable heating conditions - 165m
3
In less favourable heating conditions - 95m
3
In unfavourable heating conditions - 65m
3
For time-heating, with an interruption of more than 8 hours, the room-heating capacity is
around 25% less.
TECHNICAL DATA (ST-0311-12)
Nominal heat output : 5,0 kW
Theoretical heat output: 6,5 kW
Efficiency : 78,9 %
Weight : 66KGS
Dimensions : H500 x W430 x D335mm
The flue collar suit to the size of flue pipe: Dia.5
〞
Distance from ground to the back of flue collar : mm
Connection to the chimney of the appliance : From the top or rear
TROUBLE CLEARING
No Fire can be burnt
Please check the following measures:
A proper fuel is being used.
The air inlet is unobstructed.
Chimneys and flueways are clear
Sufficient air supply is into the room.
No extractor fan is working in the same room as the stove.
Fire blazing out of control
Please Check:
A suitable fuel is being used.
The doors are tightly closed.
The air controls are all in the closed position.
The primary air control flap is not wedged in the open position.
The glass retaining clips are not loose.
The door rope seals are in good condition
