EVERHARD INDUSTRIES
ABN: 41 009 690 859
everhard.com.au | 131 926
Head Office:
454 Newman Rd, Geebung, QLD, 4034
3
version: 002
Drainage
Solutions
Interior
Products
everhard.com.au | 131 926
Environmental
Civil &
Commercial
ADJUSTABLE FEET INSTALLATION (OPTIONAL)
Adjustable Feet can be installed onto the Nugleam Drawer System Laundry Unit by using the Everhard Adjustable
Feet (97943). Remove the nut and washer from the thread of the adjustable feet and insert the threaded component
through the four holes located on the base of the laundry unit.
Place the washer and nut onto the threaded rod of the adjustable feet on the inside of the base of the unit and tighten.
Adjust the feet to the desired height of the installation.
REMOVING DRAWERS
1. On the left runner, push the lever down.
2. On the right runner, push the lever up.
3. Pull the drawer out of the runner.
INSERTING DRAWERS
1. Push the runner back in place, keep the ball bearing always at the front part of the runner.
2. Put the drawer back on the runner. Ensure the rails of the drawer are inserted into the runner in the correct way.
3. If there are any obstacles when inserting the drawer, pull the drawer gently out and redo step 2 again.
Left runner
Right runner
