Customer Service 1-888-707-1880
or email customerservice@dyaco.ca Dyaco Canada Inc. © 2014
7
ASSEMBLY INSTRUCTION
This manual is designed to help you easily assemble, adjust and use this machine. Please
read this manual carefully. For the sake of familiarizing yourself with the parts identified in the
instruction, first study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts
list for help to identify the parts.
It will take two people to assemble your unit.
Note: If a part is not in the hardware kit, check to see if it has been preassembled. To
avoid damaging parts, do not use power tools for assembly
.
STEP 1 ATTACH THE FRONT STABILIZER
1.
Attach the front stabilizer (8) with two transportation wheels (29) to the front curved bracket of
the front frame (1). Secure using two carriage bolts (51), two curve washers (52), two spring
washers (48) and two cap nuts (53).
NOTE:
Make sure you fasten the bolts securely to avoid shaking and discomfort when cycling.
71
73
44
69
84
72
1
73
2
75
