Customer Service 1-888-707-1880
Dyaco Canada Inc. 2013
Email: customerservice@dyaco.ca
12
Treadmill Operation
After turning on the power on, place the safety key on the console for the treadmill to enter the ready
mode
. Press the start button to start the treadmill or press PROGRAM button to select the training
mode, normal or manual mode, preset programs (P1~P24) or heart rate control mode.
Manual/Normal Mode:
Turn on the power, put on the safety key and the console enters MANUAL or
normal mode then press start button to start the treadmill
or press ENTER to
set the count-down parameters (time, distance and calorie).
Press
SPEED
▲
and
▼
to adjust time, distance and calorie then press ENTER to confirm. The
system can only accept the last parameter entered, for instance, if the last
entered parameter is distance, then parameters entered previously will be
void. Only distance is accepted. Distance will be counted down, others will be
counted up.
Preset time value:
30:00(5:00~99:00) with increment of 1:00.
Preset distance value:
5.00 km/mile (1.00~9.00) with increment of 1.00.
Preset calorie value:
500(10~9990) with increment of 10.
The starting speed is 0.5/1.0(mile/km) with the incline level 0.
Preset PROGRAM:
There are 24 built in programs (P1~P24). Press PROGRAM button to choose
program P1~P24or press START button to start. The preset time is (30:00) or
press ENTER button to enter time parameter setting. 30:00(5:00~99:00) with
increment of 1:00
HRC
：
This program controls Heart Rate. Please consult doctor or professional training guide before
training. Press PROGRAM to choose HRC.
Press START button to start the training with preset values weight 70, age 30, HR target 114 and time
30:00 to count down, or press ENTER button for setting (Weight, age, target HR and time). Use
SPEED
▲▼
and INCLINE
▲▼
to adjust.
a > Time
preset
value: 30:00(5:00~99:00) with increment value of 1:00.
b > When target heart rate is not set, default setting will be 116 (60 to 220), value can be increased or
decrease at intervals of 1.
Once started, heart rate detection will control incline to allow heart rate to reach and maintain set
target heart rate.
For example:
When heart rate is lower than target, incline will increase to increase level of workout raising heart
rate. When heart rate reaches target, no changes will be made. When heart rate is higher than
target, incline will decrease to lower heart rate. If heart rate does not lower and incline is not able to
lower any further, The machine will stop to protect user.
