Customer Service 1-888-707-1880
Or email customerservice@dyaco.ca 21 Dyaco Canada Inc.©2019
HOW TO ADJUST THE DRIVE BELT
If you can feel the flywheel slip while you are pulling, even when the resistance is adjusted to
the highest level, the drive belt may need to be adjusted.
To adjust the drive belt, the pedal support tube(18) & the chain cover(43) must first be removed.
The first step to remove the two sets of carriage bolt (19), washer (17) and domed nut (7).
The second step to remove the two self
‐
tapping screws (64) from each side of chain cover (43).
And then remove another seven ST5 x 15 round head self tapping screw (50) from right chain
cover (43R).
The third step is to loose or tighten the nut (44) to adjust the belt tension.
The last step is attach the chain cover(43)& pedal support tube(18) on main frame.
56
44
11
50