Customer Service 1-888-707-1880
Or email customerservice@dyaco.ca 7 Dyaco Canada Inc.©2019
ASSEMBLY INSTRUCTIONS
This manual is designed to help you easily assemble, adjust and use this machine. Please read
this manual carefully. For the sake of familiarizing yourself with the parts identified in the
instruction, first study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list
for help to identify the parts.
It will take two people to assemble your unit.
ENSURE THAT ALL NUTS AND BOLTS ARE FIRMLY TIGHTENED AFTER EACH STEP
STEP 1
1. Attach the front stabilizer (3) to the main frame (1). Secure using two carriage bolts (2), two washers
(6) and two domed nuts (7).
2. Connect the computer sensor wire (11) to the back of the computer (9).
3. Attach computer (9) to computer bracket and tighten with two screws (10) which are preassembled on
the back of computer.
NOTE: Ensure that the wires are not pinched behind the computer.
7
6
7
6
3
2
2
1
10
9
11
