16
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlast.com
ASSEMBLY INSTRUCTIONS
STEP 8
Lower Cable (L = 3800mm)
1. With the Lower Cable (36) in the groove
of Pulley (32) thread the cable through
Leg Extension Frame (6).
2. Install Pulley No.8 (32) and 2 pcs x
Pulley Hook (55) to the Support Frame
(8) using one Hex Bolt (59), 2pcs x
Washer (67) and one Nylon Nut (70).
3. Attach the end of Lower Cable (36) to the
Leg Extension Frame (6) using one Hex
Bolt (64), 2pcs x Washer (68) and one
Nylon Nut (71).
4. Install Pulley No.9 (32) and 2pcs x
Pulley Hook (55) to the Reverse U (20)
using one Hex Bolt (59), 2pcs x Washer
(67) and one M10 Nylon Nut (70).
5. Install Pulley No.10 (32) and 2pcs x
Pulley Hook (55) to the Front Base
Frame (2) using one Hex Bolt (59), 2pcs
x Washer (67) and one Nylon Nut (70).
6. Install Pulley No.11 (32) and 2pcs x
Pulley Hook (55) to the Pulley U (22)
using one Hex Bolt (59), 2pcs x Washer
(67) and one Nylon Nut (70).
7. Attach the other end of the Cable (36)
to the Front Base Frame (2) using one
Hex Bolt (63), 2pcs x Washer (68), one
Nylon Nut (71), one Chain (42) and one
Pothook (29).
RECHECK ALL BOLTS AND NUTS ARE
TIGHTENED SECURELY BEFORE USING
THIS EQUIPMENT
No.
Description
Qty
29 Pothhook
1
32 Pulley (3.5” x 27T)
4
42 Chain
1
55 Pulley Hook
8
59 Hex Bolt (M10 x 48mm)
4
63 Hex Bolt (M8 x 40mm)
1
64 Hex Bolt (M8 x 25mm)
1
67 Washer (M10)
8
68 Washer (M8)
4
70 Nylon Nut (M10)
4
71 Nylon Nut (M8)
2
1
24
1
5
16
16
5
SAFETY NOTE
When your home gym is not in use, ensure the
weight Selector Pin (24) is located through the
welded loop on the back of the Base Frame (1) and
into the Selector Shaft (5). This will lock the weights
in place.
