9
ASSEMBLY INSTRUCTIONS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA
everlast_sa
2
19
15
16
15
16
7
19
19
1
19
IMPORTANT - ASSEMBLE WITH ALL NUTS AND BOLTS LOOSE AT FIRST, ONLY TIGHTEN AFTER
COMPLETING ALL ASSEMBLY STEPS. UNPACK THE BOX AND PLACE ALL PARTS ON THE FLOOR.
CAREFULLY REMOVE ALL PACKING MATERIAL AND CHECK EACH PART AGAINST THE MANUAL FIRST.
REMEMBER SOME PARTS ARE PRE-ASSEMBLED TO LARGER COMPONENTS.
STEP 1
Front and Rear Stabiliser Installation
1. Attach 4pcs Adjustable Foot Pads (19) to the Front and Rear Stabilisers (2&7).
2. Remove 2pcs Bolts (15), 2pcs Big Washers (16) from Front Stabilisers (2).
3. Position the Front Stabiliser (2) in front of the Main Frame (1) and align bolt holes.
4. Attach the Front Stabiliser (2) onto the front of the Main Frame (1) using 2pcs Bolts (15) and 2pcs Big
Washers (16) that were removed.
5. Remove 2pcs Bolts (15) and 2pcs Big Washers (16) from Rear Stabiliser (7).
6. Position the Rear Stabiliser (7) behind the Main Frame (1) and align bolt holes.
7. Attach the Rear Stabiliser (7) onto the rear of the Main Frame (1) using 2pcs Bolts (15) and 2pcs Big
Washers (16) that were removed.
