background image

CONGRATULATIONS!  YOU HAVE JUST PURCHASED THE EVERLAST POWERCORE

 TM  

FREESTANDING HEAVY BAG.

PLEASE READ OVER THE INSTRUCTIONS CAREFULLY PRIOR TO ASSEMBLY AND USE.

Prior to Assembly:
It is important that you follow the instructions carefully. 

Place the Everlast Powercore

TM

 Freestanding Heavy Bag at your desired location.

Remove all components from the box, and make sure all the parts are present.

Allen Wrench Tool is included, for ease of assembly.

Find a spacious area for assembly and use, free of all surrounding objects.  We recommend an area at least 4ft. x 6ft.

It is strongly recommended that well-padded bag gloves and handwraps are worn when using the Freestanding Heavy Bag.

Be sure that all bolts and nuts are aligned properly before tightening them.  When installation is complete, make sure all parts 
are snug and that the Everlast Powercore

TM

 Freestanding Heavy Bag is properly erected and ready for use.

If at any time you find any part is worn or defective, cease use of the Everlast Powercore

TM

 Freestanding Heavy Bag and contact 

ACI BRANDS INC. to provide you with any necessary replacement parts for a nominal fee.

WARNING:  Failure to follow instructions herein may cause serious injury. Boxing is an invigorating yet 
strenuous activity.  Before starting any workout routine, consult your physician.

Before each use, please inspect to make sure that the Everlast Powercore

TM

 Freestanding Heavy Bag is in good working order 

and that all bolts are tightened.

This product is subject to sliding or shifting based on the surface it rest upon. We suggest putting the Everlast Powercore

TM

 

Freestanding Heavy Bag on a non-slip surface to reduce this.

As with any sport, the participant is subject to a certain amount of risk. Boxing, by its very nature, contains an element of risk 
of injury for which the EVERLAST user must be responsible. 

The Everlast Powercore

TM

 Freestanding Heavy Bag is not a toy. Please do not allow children to use it without adult supervision.  

Similarly, before allowing people unfamiliar with the heavy bag to use it, instruct them on the basics.  The user must accept full 
responsibility for the safe and proper assembly and use of all equipment. 

Base capacity is approx. 250lbs of water or approx. 370 lbs of sand. Everlast recommends filling base with sand for best 
performance.
 

P00001266 POWERCORE

 TM 

FREESTANDING 

HEAVY BAG OWNER’S MANUAL

PAGE 1

ACI Brands Inc., 2616 Sheridan Garden Dr., Oakville, ON  L6J 7Z2

Customer Service: 800.668.5593

Summary of Contents for P00001266






Reviews: