6. MAINTENANCE
WARNING:
Before performing any type of maintenance and cleaning, be sure to unplug the unit from its power source.
CLEAN THE WATER TANK (ONCE EVERY 2-3 WEEKS)
Turn unit OFF and lift the water tank from the base and rotate the valve counter-clockwise to unscrew it. Empty the water tank
and wash tank and valve with mild dish detergent and warm water.
CLEAN BASE (ONCE A WEEK)
Turn unit OFF and unplug from wall socket.
WARNING:
Use both hands to lift the entire base and tilt to one side to pour water out as shown in (Fig.7). Use mild dish soap
and water to clean the base and clean away any residue near the floater and the atomizer with a brush or cotton swab as shown
in (Fig.7). Only pour water into the base using a cap, never direct from a faucet. Never place the base under running water as this
could cause water flow to reach the motor located at the bottom of the base.
EXTERNAL CLEANING OF HUMIDIFIER
Rinse soft cloth in warm water below 104°F, add a small amount of mild dish soap to soft cloth, and wipe off any surface stains.
Fig. 7
TOP VIEW OF BASE
5. SPECIFICATIONS
Model No.
Type
Power
Voltage
Capacity
Noise
Mist Output
EC-H2
Ultrasonic Humidifier
22 W
120V/60Hz
6.0 L
<40 dB
Lowest setting: 140ml/hr; Highest setting: 300ml/hr (+-20%)
IMPORTANT TIP:
DO NOT leave the humidifier plugged in for prolonged periods (i.e. several days or more) without use. This
causes premature failure of the circuitry. When the humidifier is not in use, turn the knob to the OFF position and UNPLUG it.
FLOATER
ATOMIZER
FAN EXHAUST
POUR WATER
OUT THIS SIDE
