9
ITALIANO
SURGELAZIONE TEMPO
(Freezing -18°C)
Con scheda in STANDBY: la pressione singola
seleziona un ciclo di raffreddamento negativo
(surgelazione) a tempo.
SURGELAZIONE TEMPERATURA
(Freezing -18°C)
Con scheda in STANDBY: la pressione singola
seleziona un ciclo di raffreddamento negativo
(surgelazione) a temperatura.
RAFFREDDAMENTO A
TEMPERATURA POSITIVA A TEMPO
(Ch3°C)
Con scheda in STANDBY: la pressione singola
commuta il ciclo di raffreddamento selezionato nel
corrispondente a tempo.
RAFFREDDAMENTO A
TEMPERATURA POSITIVA (Ch3°C)
Con scheda in STANDBY: la pressione singola
commuta il ciclo di raffreddamento selezionato nel
corrispondente a temperatura.
SOFT
Con scheda in STANDBY: la pressione singola
seleziona un ciclo di raffreddamento positivo SOFT
HARD
Con scheda in STANDBY: la pressione singola
permette di selezionare un ciclo di raffreddamento
positivo hard. Con ciclo hard selezionato: la pressione
continua per cinque secondi permette di visualizzare
il setpoint cella della seconda fase del ciclo.
Display temperatura
►
Con scheda in OFF:
visualizza la label OFF.
►
Con scheda in STANDBY:
visualizza la temperatura in cella.
►
Dopo un’interruzione elettrica:
visualizza lampeggiante la label PF.
►
Con ciclo selezionato:
visualizza il setpoint cella relativo al ciclo
selezionato.
In impostazione/selezione programmi:
visualizza la label relativa al programma scelto.
►
Con un ciclo di sbrinamento in corso:
visualizza la label DEF.
In impostazione parametri:
visualizza la label relativa al parametro.
►
Con visualizzazione Storico HACCP:
visualizza le informazioni relative allo storico.
NOTA:
Il puntino sul DIS1 del digit a destra si accende per segnalare l’ingresso di un nuovo
allarme nello storico.