7700 MultiFrame Manual
7707VR-8 8 Channel SDI Fiber Receiver
Revision
1.4
7707VR-8-13
6.2.
VistaLINK
®
MONITORED PARAMETERS
The following parameters can be remotely monitored through the
Vista
LINK
®
interface.
Parameter Description
Video Present
1 to 8
Indicates the presence of a valid video fiber input signal.
Video Error
1 to 8
Indicates the presence of errors on a video fiber input signal.
Video Standard
1 to 8
Indicated the detected video standard.
Video EDH Present
1 to 8
Indicates the presence of EDH Error Detection packets in video
fiber inputs.
Video EDH Error
1 to 8
Indicates EDH Errors in Full Field, Active Picture or ANC Data
Checksums.
Fiber Link Present
Indicates a valid fiber link data stream at fiber input.
Fiber Link Error
Indicates errors on valid fiber link input.
Optical Power Alarm
Indicates Optical Power at fiber input has dropped below a
configurable threshold.
Optical Power
Indicates optical power level at fiber input.
Table 6-1: VistaLINK
®
Monitored Parameters
6.3.
VistaLINK
®
CONTROLLED PARAMETERS
The following parameters can be remotely controlled through the
Vista
LINK
®
interface.
Parameter Description
Video Output Standard on Loss
1 to 8
Selects an Output Standard to be generated on loss of Fiber Link.
This value auto-updates to match the current valid input standard
when applied.
EDH Insertion 1 to 8
Enables recalculated EDH packets to be inserted into video
stream, with updated error flags.
Video Signal Block 1 to 8
Allows the User to Block specific video paths. Blocked outputs will
flip to generated sources.
Passcode Set
Setup the Password used to access the Video Blocking features.
Optical Alarm Threshold
Set the optical power level that trips an alarm if the fiber signal
degrades.
Table 6-2: VistaLINK
®
Controlled Parameters
