Page 3
EVERSAN
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
www.eversan.com
INTERVAL TMER MODE
In this mode the timer will count down from a pre-set interval, sound the horn, automatically reset to
the original interval and begin counting down again.
SETTING INTERVAL TIME
1. Place the
TIMER SET/INTERVAL SET
switch to
INTERVAL SET
.
2. Place the
STOP/GO
switch to
STOP
.
3. Use
MINUTES
and
SECONDS
push button switches to set the interval time desired up to 99:59.
4. Place the
STOP/GO
switch to
GO
.
5. The interval time can be reset to its original time by pushing the
RESET/12HR/24HR
button at any
time.
NOTE:
In either TIMER or CLOCK mode you increment the number by pushing and releasing the
HOURS/MINUTES/SECONDS
push buttons. To quickly decrement the numbers push the button and
hold it down.
HINT:
If you are running the 8374/8376/8378 in a timer mode and the horn goes off at inappropriate
times check to see if there is an interval time set. Place the
STOP/GO
switch to
STOP
; place the
TIMER SET/INTERVAL SET
switch to
INTERVAL SET
; use the
MINUTES
and
SECONDS
buttons to
set the time to zero. Place the
TIMER SET/ INTERVAL SET
to
TIMER SET
and you will be ready to
run in timer mode.
Remember that all these functions run in unison, therefore by changing modes you are not eliminating
other functions.
