·02·
·01·
1. Disclaimer of Liability
1. The use of this manual and installation, handling, maintenance and use of modules
are beyond Eversola
’
s control, and Eversola does not assume any responsibility for
loss, damage, injury or expense resulting from incorrect installation, handling, use or
maintenance.
2. Eversola assumes no responsibility for any infringement of intellectual property right
(including without limitation patent, copyright and trademark) or other rights of third
parties that may result from use of modules. No license in connection with intellectual
property right (including without limitation patent, copyright and trademark) or other
rights of Eversola, Whether expressly or impliedly, is granted to customers because of
use of modules.
3. All information stated in this manual is based on Eversola
’
s knowledge and
experience, but no warranty about such information (including modules
specifications) is made by Eversola, whether expressly or implied. Eversola reserves
the right to update this manual, modules specifications or relevant information
without prior notice.
2. Preface
This manual offers general installation and maintenance information of the
Photovoltaic Modules (hereinafter referred to as the Modules) of Eversola LuoYang
Co., Ltd or Eversola Jiangsu Co., Ltd (hereinafter referred to as Eversola).
Before installation, handling or maintenance, ensure that you have read and
understand this manual and use the module correctly & safely.
The installation manual is for all modules, the model names covered are:
A Series Module:
ESxxxM-Abcp, (xxx=390-410, 420-450, 525-555, in steps of 5W, 144 cells)
ESxxxM-Agcd, (xxx=390-410, 420-450, 525-555, in steps of 5W, 144 cells)
ESxxxM-24/Abpw, (xxx=290-345, in steps of 5W, 72 cells)
ESxxxP-24/Abpw, (xxx=290-345, in steps of 5W, 72 cells)
B Series Module:
ESxxxM-Bbcp, (xxx=325-340, 350-375, 440-460, in steps of 5W, 120 cells)
ESxxxM-Bgcd, (xxx=310-330, in steps of 5W, 120 cells)
ESxxxM-24/Bbpw, (xxx=320-325, in steps of 5W, 60 cells)
ESxxxP-24/Bbpw, (xxx=245-285, in steps of 5W, 60 cells)
Remarks
1.
The“xxx”means for the module power, for detailed information please refer
to the module datasheet.
2.
ES indicate Eversola, while M indicate Mono Crystalline, P indicate Poly
Crystalline.
3. Product Identification
Nameplate: Describes the product model; rated power; rated current, rated
voltage, open circuit voltage, and short circuit current. All above parameters are
measured in standard testing conditions: irradiance of 1000W/M
2
, AM 1.5, Module
temperature 25℃.
Other information, such as weight, size, maximum system voltage and maximum
fuse current, module application class and safety class are marked on the
nameplate as well.
Barcode: the barcode is located in the inside the glass the module, and contains
the serial number (also displayed).
Do not remove or alter any label or marking, this will void warranty.
4. Safety
ATTENTION: Danger of death from electric shock
1. Installation, trouble shooting and maintenance of solar installations present
hazards associated with electrocution, electrical arcs, burns, working from heights
and manual handling; therefore, this work must only be carried out by suitably
trained professionals with the appropriate safety equipment and procedures in
place at all times. All installation work must comply with the local codes and relevant
international electrical standards.
2. Electrical hazards must be taken in account at all times when working on or
around solar modules. Please take necessary actions to avoid possibility of electrical
injuries.
3. Mating connector pair on module and array leads must be the same brand and
type.
4. Do no strike modules or subject modules to impact with tools or objects.
5. Do not install a panel that has been damaged, glass smashed or back-sheet torn.
