For A series modules, four clamps must be used:
·08·
·07·
3)
Inserting System:
Fix the module with U type groove or flange beam.
All available installation methods for A series modules (Figure 9)
For other series module, fix the module with the long sides (Figure 8-1) according to the
bracket locations specified and mechanical load requirement.
For other series module, fix the module with the long sides or short sides according to
the bracket design and mechanical load requirement. (Figure 10)
Fixing eight installation holes simultaneously is recommended according to the security
Considerations. When installed correctly, the modules can withstand a maximum snow
Pressure of 5400 Pa or wind pressure of 2400 Pa.
14. When installing the modules on the roof, ensure there is an appropriate mounting
structure.
