2408RGBT/DVIT RGBHV/DVI Portable SFP Fiber Transmitter
Page - 8
Revision
1.1
2.4.4. Handling and Connecting Fibers
"
Never touch the end face of an optical fiber. Always keep dust caps on optical fiber
connectors when not connected and always remember to clean the optical end face
of a connector properly before making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore
care must be taken to prevent fiber damage caused by heavy objects or abrupt fiber bending. Evertz
recommends that you maintain a minimum bending radius of 5 cm to avoid fiber-bending loss that will
decrease the maximum attainable distance of the fiber cable. Evertz fiber optic modules come with
lockout devices to prevent the user from damaging the fiber connector by installing a module into a slot in
the frame that does not have a suitable rear plate. For further information about care and handling of fiber
optic cable, see section 3 of the Fiber Optics System Design section of this manual binder.
Summary of Contents for 2408RGBT/DVIT
Page 2: ......
