background image

 

 

 
 
 
 

INFORMATION TO USERS IN EUROPE 

 

NOTE 

 

CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL 

 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 
to the European Union EMC directive.  These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment.  This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instruction manual, may cause harmful interference to radio communications.  Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 
 

 
 
 
 
 

INFORMATION TO USERS IN THE U.S.A. 

 

NOTE 

 

FCC CLASS A DIGITAL DEVICE OR PERIPHERAL 

 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 
to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment.  This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications.  Operation of this equipment 
in a residential area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense. 
 

WARNING 

 

Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s 
authority to operate the equipment. 
 
Use of unshielded plugs or cables may cause radiation interference.  Properly shielded interface cables 
with the shield connected to the chassis ground of the device must be used 
 

Summary of Contents for 2430DAC-HD

















Reviews: