570ACO-X19-10G Series
Quick Reference Guide
Page - 30
Version 1.0
4.10. ANC (S2110-40) IP OUTPUT
Figure 4-36: WebEASY
®
- ANC(S2110-40)IP Output Tab
IP Output Status:
This parameter shows the IP output status.
Destination IP Address:
This field allows the user or control system to assign the output IP
address/multicast address.
Destination UDP Port number:
This field allows the user or control system to assign the output UDP
port number.
4.11. ANC (S2110-40) IP INPUT
Figure 4-37: WebEASY
®
- ANC(S2110-40)IP Input Tab
For 1A to 3C (refer to 4.5.1 for details)
IP Input Status:
This field shows the IP input status as Enabled or Disabled based on the routing set for
the card.
IP input IP Address:
This field allows the user or control system to assign the IP input IP address.
IP Input UDP Port:
This field allows the user or control system to assign the IP input UDP port.
IP Input Present:
This field shows if the ANC IP input is present or not.
