570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - 40
Revision 1.0
6.7.3. Manual PID Control
NOTE:
0, 1 and 8191 are reserved PID in MPEG so these are not included.
Video PID Select:
This control allows user to configure the Video PID which decoder will decode. This
control is only applicable when the
programTuningMode
is set to
manualPidSelect
.
PCR PID Select:
This control allows the user to configure the required PCR PID. This control is only
applicable when the
programTuningMode
is set to
manualPidSelect
.
VANC PID Select:
This control allows the user to select the VANC PID which decoder will decode. This
control is only applicable when the
programTuningMode
is set to
manualPidSelect
.
Audio PID Select (1-4):
This control allows the user to select the required Audio PIDs which the
decoder will embed into the output video. This control is only applicable when the
programTuningMode
is set to
manualpidSelect
.