570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - 46
Revision 1.0
Video Frame Rate:
This monitor returns the incoming video frame rate
Video Resolution:
This control returns the Resolution of the video
Video Profile And Level:
This monitor returns the profile and level of the video read from video PES.
Program audio monitor:
Reserved for future use.
6.10. SYSTEM NOTIFY
Figure
6-17 : WebEASY
®
- System Notify Tab
6.10.1. System Monitoring Control
Temperature Warning Threshold:
This control allows the user to set the temperature threshold after
the warning would be initiated.
Received Bandwidth Threshold:
Reserved for engineering use.
6.10.2. System Notify
Temperature Traps:
This control allows the user to turn On/Off the Temperature Trap.
Temperature Faults:
This control checks whether a fault is currently active/red or inactive/green.
Port Link Status SFP1:
This status highlights Data 1 port status. If the port is up, the status will be
inactive / green. If the port is down, the status will be active / red.
Port Link SFP1 Trap:
This control allows the user to enable trap receiving when the port 1 is down
and an associated correction trap when the port is up.
Port Link Status SFP2:
This status highlights Data 2 port status. If the port is up, the status will be
inactive / green. If the port is down, the status will be active / red.