5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - 26
Revision 1.0
4.10. VIDEO NOTIFY
Figure 4-16: WebEASY
®
– Video Notify
Video Monitoring Control
Black Duration (1 to 2499):
This control allows the user to set the duration, in frames of active
picture content below 7 IRE that is considered a fault. This parameter is adjusted in four-frame
increments. As in 1 = 4 frames and 10 = 40 frames. The range is 1 (4 frames) to 2499 (9996 frames).
Picture Noise Level (1 to 10):
This control allows the user to set approximate level of noise
expected in video signal feed. It is used by the freeze detect feature to distinguish motion from
background noise on top of a video feed.
Freeze Duration (1 to 2499):
This control allows the user to set the duration, in frames of video
activity under the Picture Noise Level that is considered a fault. This parameter is adjusted in four-
frame increments. As in 1 = 4 frames and 10 =40 frames. The range is 1 (4 frames) to 2499 (9996
frames).
Video Notify
These controls allow the user to enable and disable traps for each condition based on the thresholds
set in the
Video Monitor Control
section above. Red color indicates that a fault is triggered and
green indicates that there is no fault.
