5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - 40
Revision 1.0
5.7.
PRESET TAB
Figure 5-9: VistaLINK
®
- Preset Tab
For each of the 10 Presets the following parameters are available:
Preset Name:
This field allows the user to enter a name for each preset.
Preset Store:
This control will take the current 5782ENC-H264HD-IPASI settings and save them to a
Preset. When storing a preset all parameters will be stored except the following:
•
Control Port IP address, Netmask and Gateway.
•
Data Port 1 and 2 IP address, Netmask and Gateway.
•
Syslog Configuration.
•
Other Preset Configurations.
•
SNMP Trap destinations, Faults and Video Notify status.
Preset Recall:
This control will take the stored 5782ENC-H264HD-IPASI settings and apply them.
When recalling a preset all parameters will be set except the following:
•
Control Port IP address, Netmask and Gateway will not change.
•
Data Port 1 and 2 IP address, Netmask and Gateway will not change.
•
Syslog Configuration will not change.
•
Presets will not change.
•
SNMP Trap destinations, Faults and Video Notify status will not change.
