7700 Multi-Frame Manual
7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter
Revision
1.1
Page-1
1. OVERVIEW
The 7707EO-3G is a
Vista
LINK
®
enabled, electrical to optical converter for SMPTE 424M (2.97Gb/s),
SMPTE 292M (1.485Gb/s), SMPTE 259M-C (270Mb/s), SMPTE 305M (SDTi), and DVB-ASI (270Mb/s)
signals. Monitoring and control of card status and parameters is provided locally at the card edge, and
remotely via
Vista
LINK
®
capability. The 7707EO-3G accepts one coaxial SDI input, and provides one
reclocked fiber output and two reclocked coaxial SDI outputs. Also, the 7707EO-3G provides one user
selectable GPO.
The fiber output is available in an assortment of optical wavelengths, accommodating standard, CWDM, or
DWDM transmission schemes. (See Specifications, section 3, for complete information).
7707EO13-3G
1310 nm FP
-7dBm output, suitable for distances up to 50 Km
7707EO15-3G
1550 nm DFB
0dBm output, suitable for distances up to 75 Km
There are several versions with built in isolators specifically suited to coarse wave division multiplexing
(CWDM) applications. These versions all have 0dBm output and are suitable for distances up to 75 Km.
7707EO27-3G
1270 nm DFB
7707EO29-3G
1290 nm DFB
7707EO31-3G
1310 nm DFB
7707EO33-3G
1330 nm DFB
7707EO35-3G
1350 nm DFB
7707EO37-3G
1370 nm DFB
7707EO43-3G
1430 nm DFB
7707EO45-3G
1450 nm DFB
7707EO47-3G
1470 nm DFB
7707EO49-3G
1490 nm DFB
7707EO51-3G
1510 nm DFB
7707EO53-3G
1530 nm DFB
7707EO55-3G
1550 nm DFB
7707EO57-3G
1570 nm DFB
7707EO59-3G
1590 nm DFB
7707EO61-3G
1610 nm DFB
There are several versions with built in isolators specifically suited to dense wave division multiplexing
(DWDM) applications. The DWDM versions are suitable for distances >50 km @ 2.97 Gb/s (for DWDM
applications contact factory).
7707EODyyy-3G
DWDM DFB laser output, yyy – ITU channel number
The 7707EO-3G occupies one card slot and can be housed in either a 1RU frame, which will hold up to
three modules, or a 3 RU frame, which will hold up to 15 modules.
