7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Revision 1.1.1
Page - 95
6.30.1.3. Dolby Metadata Missing Preset Trigger
The
Dolby Metadata Missing Trigger
is used to trigger presets saved to the module when the absence
of Metadata is detected. The following selections are available:
None
When set to
None
, the module will not trigger a preset on Dolby absence.
User Preset 1- 10
When set to
User Preset 1
through
10
when the absence of Dolby signal is
detected the corresponding preset will be applied to the module.
6.30.2. Program Config Assert
The
Program Config Assert
is used to allow the user to select a specific user defined preset with a
presence of a specific Program Mode. Each of the different program modes can select any of the 10 user
defined presets.
6.30.3. Program Config De-assert
The
Program Config De-assert
is used to allow the user to select a specific user defined preset with the
absence of a specific Program Mode. Each of the different program modes can select any of the 10 user
defined presets.
