7800 Multiframe Manual
7825DSK2-LG(-HD)(-3G) 3G/HD/SD Dual Downstream Keyer
RCP OPERATION
Revision 2.0
Page 5-37
5.14.6.
Setting the Colours for the EAS Crawl Display
There are three different levels of EAS messages – warning messages, watch messages and test
messages. Each message typically has a different background and foreground colour associated with
it so that the viewer will immediately know the severity of the EAS alert. There are six menu items
used to set the foreground and background colours. For the sake of simplicity only the menu item for
setting the warning background colour will be shown in the manual. The other menu items are used in
the same way.
EAS
This menu item is used to set the background colour for the warning
messages. When you first enter this menu item you will be shown a set of
colour values for each of the RGB colour components. The display will
show a value similar to the following:
R:255G:B 0 G: 0
To change the colour value, press the
SELECT
button. The colon (:) after
the R will change to an equals (=) sign indicating that you can change the
R value. Use the
or
buttons to change the red colour component
value. When you press the
SELECT
button the colon after the G will
change to an equals sign indicating that you can change the G value.
Proceed to set the G and B values in the same way. After changing the B
value, press the
SELECT
button and the display will show a value similar
to the following:
R:255G:B 128 G: 128
Warning BG
R:255G:B 0 G: 0
