7800 Multiframe Manual
7825DSK2-LG(-HD)(-3G) 3G/HD/SD Dual Downstream Keyer
VLPRO OPERATION
Revision 2.0
Page 4-21
The numbers following the wipe patterns reference the angle of the wipe and
direction of the wipe. Arrows indicate the direction of the wipe. For example, a Wipe
45 transition will start a 45 degree wipe that will progress from the top left of the
screen to the bottom right of the screen. Please refer to Figure 4-11.
Figure 4-11: Wipe Pattern Angles
4.10.2.
Setting the Transition Rate
This option is used to set the duration (time) of the transition. The duration is measured in frames.
4.10.3.
Setting the Transition Swap Mode
When set to
Swap
the input video and audio of the Preview Bus and the Program Bus will be swapped
at the end of the transition. Logos and other media being keyed on the respective buses will also be
swapped with the inputs.
When set to
No Swap
the input video and audio of the Preview Bus will be transferred to the Program
Bus transition. Logos and other media being keyed on the Preview Bus will also be transferred to the
Program Bus. The Preview Bus will remain unchanged.
4.10.4.
Pausing a Transition
This option is used to set whether the Transition can be paused. The following items are available in
the drop down menu:
When set to
On
, the transition may be paused by pressing the
TAKE
button while the transition is
being performed. To continue the transition, press the
TAKE
button again.
When set to
Off,
the transition cannot be paused
.
