7882DEC-H264HD-IPASI
HD/SD MPEG-2 and H.264 Decoder
Page - 38
Revision 1.0
WEBEASY
Audio Control
Audio Delay <1-8>:
This parameter allows the user to add a delay to the audio to synchronize the
audio and the video stream. This can be done by sliding the audio delay to the desired setting, to a
maximum of 50ms for each of the 8 audio streams.
Audio Mode <1-8>:
This parameter allows the user to set the audio mode to either bypass or
decode the audio stream.
Audio DownMix Mode:
This parameter allows the user to set the audio downmix mode.
Input Program Control
Program Tuning Mode:
This parameter allows the user to tell the decoder how to select the
program to decode. The options include Auto or Manual PID Select.
Auto Program Select Mode:
This parameter allows the user to specify which program to select to
decode, the options include First Program in PAT, Specific Service Name, Specific Program Select or
Lowest Program Number. This parameter is only available if Program Tuning Mode is set to Auto PID
Select.
Program Select:
This parameter allows the user to select the program to decode; this parameter is
only available if Auto Program Select Mode is set to Specific Program Select.
VANC PID Select:
This parameter allows the user to specify the SMPTE2038 PID. This PID is
required to reconstruct Vertical Ancillary data from the SMPTE2038.
Manual Audio PID Select
Audio PID <1-8>:
This parameter allows the user to set the audio Packet ID (PID) for the associated
audio stream.
