7882DM2-LB4-CA2-ASI Series
DVB-S/S2/S2X Satellite Demodulator
Page - 16
Revision 1.0
4.2.
TS PATH
The 7882DM2-LB4-CA2-ASI allows the user to choose the input source from a selection of eight
different inputs. The available options are four RF inputs and four ASI inputs, as shown in Figure
Demodulator 1
RF 1
M
U
X
Demodulator 2
RF 2
Demodulator 3
RF 3
Demodulator 4
RF 4
TS 1
TS 2
TS 3
TS 4
ASI 1
ASI 2
ASI 3
ASI 4
Figure
4-4 : Input Source Diagram
To choose the input to the demodulator, follow the steps below:
1. Navigate to the
TS Path
tab. Under the
TS In Mapping & Status
section, select
Main Source
as Demod 1, Demod 2, Demod 3, Demod 4, ASI1, ASI2, ASI3 or ASI4.
2. If redundancy is not required, set
Source Mode
to
Force Main
.
3. Click
Apply
after changing the settings and click
Refresh
to ensure the values are applied and
taken. Both commands can be found at the top of the web page.
