HD9690 Series HDTV Graticule Generator Manual
TECHNICAL DESCRIPTION
Revision 1.5
Page 5-7
15. Press the <Enter> key when prompted for a “Password”. A message indicating that you logged in is
displayed.
16. At the “
FTP>
” prompt type
hash
to turn on the progress indicator during the ftp upload.
17. At the “
FTP>
” prompt type
quote site upgrade
to put the unit in upgrade mode. A message
indicating that you are in upgrade mode is displayed.
18. At the “
FTP>
” prompt type:
put “the name of the file.bin”
to send the firmware to the unit.
(For example:
put HD9690_1v0b310.bin
)
19. If the application file is not local to where you are performing the ftp, then include the path with the
name (For example:
put c:\firmware\ HD9690_1v0b310.bin
)
During this time it is mandatory that all power cycles of the unit be avoided. The
figure below displays a successful FTP session.
20. A message indicating the successful connection to the module is displayed
21. File transfer occurs in several seconds, and the DOS window displays the “
FTP>
” prompt again
22. At the “
FTP>
” prompt type
quit
to exit the FTP procedure.