HDSD9545DLY - PRO Profanity Bypass Delay Manual
Page 4-2
Revision
1.3.7
TECHNICAL DESCRIPTION
4.1.4. DARS Reference (not implemented at the time of writing)
Type:
AES Digital Audio Signal with 48KHz sample rate.
Standard:
SMPTE 276M-1995 single ended AES
Connectors:
BNC per IEC 61169-8 Annex A
Termination:
High impedance non-looping or 75 ohm non looping (jumper selectable)
4.1.5. AES
Audio
Inputs
Standards:
SMPTE 276M single ended AES
Number of Inputs:
2 Groups of 4
Connector:
BNC per IEC 61169-8 Annex A
Signal Level:
1 V p-p ± 10%
Return Loss:
> 25 dB up to 6 MHz
4.1.6. AES Audio Outputs
Standards:
SMPTE 276M single ended AES
Number of Outputs:
3 buses, 4 outputs per bus
Safe AES Inputs bypass protected to AES A outputs when bypass relay option is
installed
Connector:
BNC per IEC 61169-8 Annex A
Signal Level:
1 v p-p
Return Loss:
> 35 dB up to 6 MHz
Reference:
From Video Reference.
4.1.7. GPI Control Port
Number of Inputs:
8 opto-isolated, active high or active low, programmable functions
Number of Outputs:
4 sets of relay contacts, normally closed, programmable functions
Relay Max Current:
1 A at 30 V DC
4.1.8. Remote Control Port
Standard:
RS
232
Connector:
Software upgrade cable female DB-9
Baud Rate:
115200
Format:
8 bits, no parity, and 2 stop bits
4.1.9. Functional
Maximum Total Delay: (configurable between live and safe inputs)
HDSD9545DLY-PRO
24 seconds of HD or SD delay
HDSD9545DLY-PRO-HD40
40 seconds of HD delay or 240 seconds of SD delay
Summary of Contents for HDSD9545DLY-PRO
Page 2: ......
