HDSD9545DLY - PRO Profanity Bypass Delay Manual
TECHNICAL DESCRIPTION
Revision
1.3.7
Page 4-1
4. TECHNICAL
DESCRIPTION
4.1. SPECIFICATIONS
4.1.1. Serial Digital Video Inputs
Standards:
SMPTE 292M (1.5 Gb/s), SMPTE 259M (270Mb/s) – see Table 2-3
Number of Inputs:
2
Connector:
BNC per IEC 61169-8 Annex A
Equalisation:
HD Video Stds:
Automatic up to 50m on Input A and 140m on Input B
with Belden 1694 or equivalent cable
SD Video Stds:
Automatic up to 250m with Belden 8281 or equivalent cable
Return Loss:
Input A:
> 15 dB up to 1.0 Gb/s, >10dB at 1.5 Gb/s
Input B:
> 15 dB up to 1.5 Gb/s
4.1.2. Serial Digital Video Outputs
Standard:
Same as Input
Number of Outputs:
5 outputs (2 copies of Output A)
I
nput A bypass protected to output A1.
Connector:
BNC per IEC 61169-8 Annex A
Signal Level:
800mV
nominal
DC Offset:
0V
±0.5V
Rise and Fall Time:
HD Video Stds:
200ps nominal
SD Video Stds:
650ps nominal
Overshoot:
<10% of amplitude
Wide Band Jitter:
< 0.2 UI
Output Return Loss:
A1
> 10 dB up to 1.5 Gb/s
Out A2, B, C, D, E
> 15 dB up to 1.5 Gb/s
Output Phase:
measured with respect to the Genlock reference
0 to a full frame of offset - separate H and V phase adjustments
4.1.3. Video
Reference
Type:
Menu selectable - depends on video format (See section Table 2-3)
NTSC or PAL Colour Black 1 V p-p
Composite Bi-level sync (525i/59.94 or 625i/50) 300 mV
HD Tri-level Sync
Connectors:
BNC per IEC 61169-8 Annex A
Termination:
High impedance loop through or High impedance non-looping or 75 ohm non
looping (jumper selectable)
Summary of Contents for HDSD9545DLY-PRO
Page 2: ......
